How To Build A Pink Box

Written By Baba O'Riley

The function of a Pink Box is to add a hold button that allows music or anything else to be played into the telephone while the person is on hold. This box can either be built right in the telephone or as a seperate box.

Materials Needed

Construction

  1. Open the wall box and locate the RED and GREEN wires.
  2. Take a piece of RED wire, strip the end, and attach it to the red lead on the wall box. Do the same for the GREEN.
  3. Connect the GREEN wire to the ANODE end of the LED.
  4. Connect the CATHODE end of the LED to the UPPER pin of the primary side of the transformer (See diagram below).
                                 _____
         To one phono pole   ---! Top !--- To CATHODE of LED
                               -!View !- Primary side
       To other phono pole   ---!_____!--- To pole or trans. & one pole of switch
    
  5. Connect the pin directly across to one pole of the phono jack.
  6. Connect the RED wire to one side of resistor and to the C pole of the transistor.
  7. Connect the open pin of the switch the other side of the resistor and to the G pole of the transistor.

Wiring Diagram

            RCA Jack  Transformer   LED
                        _____      C   A
    Pole of Jack --/---! Top !---/--(*)--\------GREEN wire
                      -!View !- Primary   --I---RED wire
    Pole of Jack --/---!_____!---/-I       (O)
                                   I        I
                                   I     [--I-----Pole of Switch
                                   I
                                   I--------------Pole of Switch

Key To Symbols

  --       Wire
  I        Connection or wire
  /        Connection or wire
  _/       C pole of transistor    --(*)--
  [_)--    G pole of transistor    I
   I       A pole of transistor   (O)  Resis
                                   I
       _____
   ---! Top !---
     -! View!- Primary    Transformer
   ---!_____!---

Use Of The Pink Box

Hook the RED and GREEN wires up to the appropriate terminals and hook the RCA jack to the output on your stereo. Turn on your stereo at a good volume. Now call a friend. To test the Box, hold down the switcn and hang up the phone. The LED should go on and your friend should hear music. If nothing happens, start over. The hold is shut off if you pick up a phone on that line or your end hangs up.

Brought to you by: The Crack Crew Written by: Baba O'Riley